17

2023

-

05

Introduction of single-side knitting machine and double-side knitting machine


Single-sided knitting machines usually need sinker to assist needle withdrawal and yarn bending into loops, while traditional double-sided knitting machines are difficult to knit normally without sinker devices when they are used to knit single-sided products. At present, two methods are generally adopted to solve this problem. One is that most double-sided circular machines are equipped with anti-channeling triangles, that is, when the lower needle is knitted, the upper needle can be pushed out a little and retracted before the yarn is padded. In this way, the protruding upper needle can be used as a holding sinker to press on the old loop of the lower needle that rises and retreats to prevent the old loop from rising together with the needle; another more effective method is a double-sided circular machine with sinker. It also has a sinker device installed on the double-sided circular machine to assist the knitting needles in forming loops. In this way, on the one hand, when weaving double-sided fabrics, there is no need to hang cloth, which can start automatically, and it is easy to resume weaving when cloth falls off or large holes occur. On the other hand, when weaving single-sided fabrics, the sinker on the machine can be used to assist the knitting needles to retreat and bend the yarn to form loops, thus achieving the purpose of exchanging single-sided machines.
Structural Interchange of 1. Single Facer
According to the different products, single-sided tongue needle knitting machine can be divided into single-sided plain knitting machine, single-sided three-line pile knitting machine and single-sided terry machine. Now, due to the standardization and generalization of basic parts such as racks and triangles, these models of various manufacturers can be converted from one model to another through simple replacement of triangles and some parts. An engineer only needs 2~3h to complete their exchange.
Interchange between 2. double-sided machines
Double-sided round machines are usually divided into two categories: rib type and cotton wool type. In each category, some changed ribs or cotton wool can be produced by changing the triangular position according to different triangular structures. Rib composite tissue or cotton wool composite tissue, such as milano rib, polyester cover cotton, honeycomb mesh, etc. Double-sided multi-function big round machine, in addition to the exchange between rib and cotton, but also can be easily exchanged between various organizations, so that the variety of change is very convenient. In order to adapt to this transformation, the multi-functional double-sided circular machine triangle type in addition to the traditional ring, ring and floating line, but also increased the anti-channeling triangle, in the ring can be synchronized or lagging ring triangle. Anti-channeling triangles are used for single-sided knitting rows, while the looped triangles on the needle cylinder can be used to weave cotton wool and wide rib-like tissues with hysteresis and synchronous looped triangles, respectively.
3. Machine Number and Barrel Diameter Replacement
In order to adapt to different seasons, the same machine can be used to weave products of different thicknesses, and changing the machine number has practical significance for manufacturers. In order to meet the needs of manufacturers, many machine manufacturers now greatly simplify the replacement of syringes and needle discs. For example, the previous "X"-shaped frame was changed to a "V"-shaped frame, so that the syringe could only be replaced from the upper part in the past, but now it can be replaced from the side without major disassembly of the machine.

MESSSAGES

Customer Message

Submission